ComposiGrip Discount Codes

Heavy-duty anti-slip stair treads cut to your staircase's exact dimensions, for indoor or outdoor steps and a clean, professional finish. Measure your tread depth and width carefully before ordering, since custom cuts cannot be returned or exchanged.

Onyx black 48-inch covers with a molded traction surface that grips in rain, snow and ice, made to cover worn stair edges. Lightweight and easy to cut to size. Check your step width before ordering so the 48-inch length fits right.

Light gray 48-inch covers with an integrally molded non-slip surface that fits flush on wood, concrete or steel-grated stairs. Lightweight and easy to cut. Confirm your stair dimensions before ordering for a flush fit.

A fast-setting polyurethane sealant with a toothpaste-like consistency that cures into a tough, flexible rubber seal. Works across -40°F to 150°F. For a textured finish, the manufacturer recommends Bostik 916 or 2000 Textured instead.

Low-profile 2-inch anti-slip strips for wood stairs, concrete steps, ramps, decks, and porches, indoors or out. Pre-drilled holes and mounting slots make fitting quick. Check your surface type before ordering, wood uses the included screws, concrete needs the supplied anchors and a 1/4" drill bit.

Gray 2-inch anti-slip strips grip wood, concrete, and composite surfaces on stairs, ramps, decks, porches, and walkways. Built for high-traffic and outdoor spots. Check your surface before ordering: use the included screws on wood, or the supplied anchors and a 1/4" drill bit on concrete.

Photoluminescent rigid vinyl sign showing the running man with EXIT, mounted on or beside exit doors with 3M double-sided tape. It charges from ambient light and glows for hours after power loss. Check the 13 x 4.6 inch size fits your door before ordering.

Model C4151 photoluminescent nosing for carpeted stairs, 2.7 inches wide, with a clear-anodized aluminum profile and yellow silicon-carbide non-slip insert. Protects the step edge and glows after power loss. Check your stair dimensions before ordering.

This Ecoglo C4171 stair nosing combines a clear-anodized aluminum profile, protected photoluminescent strips, and a hard-wearing black silicon-carbide insert. Built for carpeted stairs in commercial and public buildings. Check the model and finish against your project specs before ordering.

This Ecoglo stair nosing uses a black-anodized aluminum profile with photoluminescent strips and a yellow silicon-carbide insert for high-visibility contrast. Made for carpeted stairs in commercial and public buildings. Check model C4251 against your project specs before ordering.

This Ecoglo E2051 strip combines roughly 0.6 inches of photoluminescent material with a 0.9-inch yellow silicon-carbide anti-slip surface on a rigid aluminum base. Works indoors and out with no wiring. Check strip length and quantity against your stair run before ordering.

This Ecoglo E2071 strip combines about 0.6 inches of photoluminescent material with a 0.9-inch black silicon-carbide anti-slip area on a rigid aluminum base. Works indoors and outdoors with no electricity. Measure your stair edges before ordering to get coverage right.

Ecoglo E3061 is a 2-inch rigid aluminum stair edge strip combining three photoluminescent ridges with a gray anti-slip surface. Glows during power outages and improves traction in normal light. Check your stair width and nose profile before ordering to ensure proper fit.

Ecoglo E4051 is a 2-inch aluminum stair strip that pairs a protected photoluminescent section with a yellow anti-slip insert. Glows when lighting drops. The yellow insert provides traction and visibility but does not glow. Check stair dimensions and local egress code requirements before ordering.

Ecoglo E4071 is a 2-inch aluminum stair strip that pairs a protected photoluminescent section with a black anti-slip insert. Glows when lighting drops. The black insert provides traction and contrast but does not glow. Check stair dimensions and local egress code requirements before ordering.

Ecoglo EX Standard photoluminescent exit sign recharges from ambient light and stays visible during outages. Clear anodized aluminum frame, universal mount, double-sided red lettering. Non-toxic and non-radioactive. Check your lighting levels (minimum 54 lux required) and mounting location before ordering. Indoor use only.

Ecoglo photoluminescent exit sign with red lettering charges from natural or artificial light and glows during power outages. Available with or without aluminum frame, universal mount included. Indoor use only. Confirm your lighting meets the 54 lux minimum before ordering.

Ecoglo F4151 absorbs light during the day and glows during power outages. Yellow insert adds traction and contrast (but doesn't glow itself). Fits concrete, wood, tile, steel, thin carpet. Confirm your building's code requirements and lighting levels before ordering.

Ecoglo F4161 photoluminescent nosing charges from ambient light and glows in darkness for emergency egress. Gray insert provides traction and contrast but doesn't glow itself. Fits concrete, wood, tile, steel, thin carpet. Confirm code requirements and lighting levels before ordering.

Ecoglo F4171 photoluminescent nosing absorbs ambient light and glows when lighting fails. Black insert adds traction and contrast but doesn't glow. Designed for exit stairways and emergency egress routes. Fits concrete, wood, tile, steel, thin carpet. Confirm code compliance before ordering.

Black anodized flat stair nosing with protected photoluminescent strips that absorb ambient light and remain visible after power loss. Yellow non-slip insert adds traction and contrast. Right-angled profile fits over concrete, timber, tile, steel, or checker plate stair edges. Check your stair type and measure the leading edge before ordering.

Black anodized flat stair nosing with photoluminescent step-edge strips that absorb light and glow when normal lighting is lost. Gray non-slip insert provides traction and step-edge contrast without high-visibility color. Fits concrete, timber, tile, steel, checker plate, and suitable thin-carpeted stairs. Check stair type and measure before ordering.

Black anodized flat stair nosing with protected photoluminescent strips that remain visible after lighting is reduced or lost. Black non-slip insert provides traction and visible step-edge contrast. Right-angled profile fits concrete, timber, tile, steel, checker plate, and suitable thin-carpeted stairs. Check stair type and measure the leading edge before ordering.

Wide flat stair nosing with a 3.2 inch clear-anodized aluminum profile, photoluminescent step-edge strips that glow after lights go out, and a high-visibility yellow non-slip insert. UL 1994 and ULC 572 listed. Fits concrete, timber, tile, steel, checker plate, and suitable thin-carpeted stairs. Measure your stair edge and check stair type before ordering.

This photoluminescent stair nosing features a 3.2-inch aluminum profile with grey non-slip insert for better visibility and traction. Install using polyurethane adhesive on concrete, timber or metal stairs. Check stair edge condition fits the right-angled profile.

Flat stair nosing that marks step edges with luminous strips that charge from ambient light and remain visible after the lights go out. The black silicon carbide insert adds traction but does not glow. Designed for exit stairs and emergency egress routes. Measure stair width before ordering.

Photoluminescent guidance strip with a rigid aluminum base that spreads load and resists moisture when installed with polyurethane adhesive. The ridges protect the glow material and add slip resistance. Works on smooth and textured surfaces indoors and outdoors. Verify your code requirements and surface prep before installing.

A 1-inch wide photoluminescent strip in 8ft and 10ft standard lengths, with custom cuts available. Ridge design guards against wear, and the rigid aluminum base bonds with polyurethane adhesive. For outdoor use, skip mechanical fasteners. Measure your run before ordering.

Photoluminescent perimeter strips that glow for hours after a power loss, charging from natural or artificial light. 47" lengths cut to size, UL1994 listed. Check surface is clean and dry before installing with the 3M foam tape backing.

The yellow model in the N20 series: 1.5-inch-wide silicon carbide grip on a rigid aluminum base for concrete, wood, and metal stairs, indoors and out. Not photoluminescent, so it will not glow. Check stair edge condition before ordering.